features low profile package ideal for automated placement ultrafast reverse recovery time low power losses, high efficiency low forward voltage drop high surge capability high temperature soldering 260 /10 seconds at terminals component in accordance to rohs 2002/95/1 and weee 2002/96/ec mechanical date major ratings and characteristics case: jedec msma molded plastic body over glass passivated chip terminals: solder plated, solderable per j-std-002b and jesd22-b102d polarit y : laser band denotes cathode end i f(av) 1.0 a 20 v to 100 v 30 a 0.50v,0.55v,0.70v,0.85v v rrm i fsm v f t j max. 125 c y maximum ratings & thermal characteristics (t a = 25 c unless otherwise noted) note 1: mounted on p.c.b. with 0.2 x 0.2? (5.0 x 5.0mm) copper pad areas. electrical characteristics (t a = 25 c unless otherwise noted) note 2: pulse test:300 s pulse width,1% duty cycle. mask 12 mask13~ mask14 mask15~ mask16 0.50 0.55 0.70 mask 16 mask 18 items symbol mask 12 mask 13 mask 14 mask 15 mask 110 unit maximum repetitive peak reverse voltage v rrm 20 30 40 50 60 80 100 v maximum rms voltage v rms 14 21 28 35 42 56 maximum dc blocking voltage v dc 20 30 40 50 t j t stg ?65 to +125 maximum average forward rectified current i f(av) 1.0 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 30 reverse current v r =v dc t a =25 t a =100 i r items test conditions symbol instantaneous forward voltage i f =1.0a (2) v f ma j 70 v 0.5 10 v 100 v mask18~ MASK110 0.85 35 a 60 80 voltage rate of change (rated v r ) dv/dt 10000 v/s unit thermal resistance from junction to lead (1) r jl /w operating junction and storage temperature range mask12~MASK110 surface mount schottky rectifiers http://www.trr-jx.com
characteristic curves (t a =25 unless otherwise noted) mask12~MASK110 surface mount schottky rectifiers http://www.trr-jx.com
package outline notice product is intended for use in general electronics applications. product should be worked less than the ratings; if exceeded, may cause permanent damage.or introduce latent failure mechanisms. the absolute maximum ratings are rated values and must not be exceeded during operation. the following are the general derating methods you design a circuit with a device. i f(av) : we recommend that the worst case current be no greater than 80% . i fsm : this rating specifies the non-repetitive peak current. this is only applied for an abnormal operation, which the general during the lifespan of the device. t j : derate this rating when using a device in order to ensure high reliability. we recommend that the device be used at a t j of below 125c. trr is registered trademark of rising-sun technology. rising-sun te chnology reserves the right to make changes to any product i n this specification to improve reli ability,functional characterist ics,or design without notice. rising-sun technology does not assure any liability arising out of the applic ations or any product descr ibed in this specificat ion. rising-sun technology advises customers to obtain the latest vers ion of the device information before placing orders to verify that the required information is current. mask12~MASK110 surface mount schottky rectifiers http://www.trr-jx.com
|
